Voopoo DRAG 2 | Refresh Kit
Description
Have you tried the Voopoo DRAG 2 Kit for good measure ?
The Voopoo DRAG 2 Refresh Kit, Requires x2 18650 Batteies. layout, GENE.FIT Chipset, and is coupled with the new PnP Pod Tank.
Constructed from durable zinc-alloy, the chassis of the Drag 2 Kit is impervious to light falls and drops. Powered by the Gene.FIT Chipset, the Drag 2 Kit is powerful and offers ultra fast firing and a comprehensive temperature control suite for pairings with nickel, titanium, and stainless steel wires.
Equipped with the PnP Pod Tank, the VOOPOO Drag 2 offers usage with the heralded PnP Coil Series to create exquisite Vapour Flavour in a visually striking form factor.
Drag 2 Platinum MOD Features and Specs:
Dimensions – 88.3 x 51 x 26.5mm
Requires (2x) 18650 AMP BATTERIES (Sold Separately)
Highly Advanced GENE FIT Chip
Wattage Output Range: 5 – 177W
Voltage Output Range: 0 – 7.5V
Resistance Range – Power Mode: 0.05 – 3.0ohms
Resistance Range – TC Mode: 0.05 – 1.0ohms
Temperature Range: 100 – 315C
Supports Ni200, Titanium, Stainless Steel Compatibility
TCR Adjustments Mode
Battery Set
Flavour Set
Cloud Set
Superior Zinc Alloy Chassis Construction
Visually Striking Resin Inlay Design
Intuitive OLED Screen
Large Firing Button
Mode-Setting Button
Two Adjustment Buttons
Magnetised Battery Door Cover
Output Over-Current Protection
Overcharge Protection
Over Discharge Protection
Short-Circuit Protection
Over Temperature Protection
Brand Reverse Protection
Switch Timeout Protection – 10 Seconds
Micro USB Port
*External charger highly recommended for Optimal Charging*
510 Connection
PnP Pod Tank Features and Specs:
26mm Diameter
4.5ml Refillable Pod Capacity
Bottom Fill System
VooPoo PnP Coil Series
Bottom Press Fit Coil Installation
Dual Slotted Bottom Airflow Control Ring
Threaded 510 Connection
In the box:
Drag 2 177W TC Mod
PnP Pod Tank
0.2ohm PnP-Vm5 Mesh Coils- 40-60w (Direct To Lung)
0.15ohm PnP-VM6 Mesh Coils - 60-80w (Direct To Lung)
User Manual
USB Cable
This product is for advanced user!
Warning: These coils are Sub-Ohm resistance and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower.
Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils.
Do not use short or flat 510 connection on any hybrid or hybrid style device.
If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Disclaimer:
Please Note: There is always risk involved when using rechargeable batteries at any time and under any circumstances. Vape Freedom is not held responsible for any damage for any modification of the batteries, chargers, devices and other products that are sold on Vape Freedom
Vape Freedom will not be held liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) nor any rechargeable battery/batteries as well as chargers. Please have a great understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be aware that they are very sensitive to charging characteristics and could possibly explode or burn if mishandled. Please make sure that you have knowledge on all rechargeable batteries before you use them. Always charge batteries on a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there is visible damage to a battery, please do not use it. Be sure to always store and transport the rechargeable cells in a safe, non-conductive container.
Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates. There are many places that will dispose of batteries properly for you.
If you have any further questions about batteries, you can also call, chat, or email our customer service team, as we are always happy to help at smokengifts@yahoo.com.au
Please note that we do not recommend using the built-in USB charging feature on mods that use replaceable lithium ion cells. Lithium ion batteries must be balance charged using a proper external charger to avoid damaging the cells and to reduce the risk of venting. Micro and mini USB ports are notoriously fragile and as such we do not offer a warranty or repair service on any USB charging ports if you choose to ignore this warning.